9. How to Mix UV-Color Foam

In this video, I'm gonna show you how to make colored and UV foam which is the exact same way. Let's talk about the colored foam colored foam comes in three different colors blue, which you can tell because it has a B on the top green and red, which has an R. Now. I'm gonna show you the green powder because it looks a little orange but do not be deceive when you get water on that bad boy. It will turn slime green. It's gonna be amazing. All right.

So what we like to do is take all the contents out and then have the powder as is just like I showed you in the the green right there. Okay. So let's take a look at what we have inside each of these colored and UV Foams. So when you open it up,

Very important. We've supplied you with some gloves. So that's important. Next. We have a small cup. Now. This is a quarter of a cup. So 1/4. All right and last we have this UV Powder so I'm gonna go ahead and take that out.

Just like that.

Gonna make sure it goes all the way down to the bottom of the back. You want to do this over the sink or do this outside?

And go ahead and cut into the bag just like this.

Perfect that in the sink.

and I'm going to twist it just like this.

And put it all the way inside.

Just like that and empty it completely do this over the thing like that.

great, and now that glow-in-the-dark is ready to go. Okay. So let's talk about filling your containers actually mixing it. If you're going to do it on site say you're using the five gallon bucket method what you're gonna do is you're gonna take one scoop.

Of this and put it at the bottom of your water container before you fill it up with water.

After you put one scoop at the bottom of your water container go ahead and start filling up and the water will mix it for you. Okay, if you don't want to mix on-site and you use the gallon jug method,

all you have to do is take two scoops.

And put it in this because remember the ratio is one cup.

To 40 gallons of water. Now whenever you put solution in your water container remember, it's 40 gallons to a half a gallon of solution. So this is a gallon of solution. You're going to put two scoops in there. So whenever you pour half a gallon of this you got the right ratio. All right, so I'm going to show you how to do this. Very cleanly. What you want to do is you want to take the lid off of that.

And we're going to take two scoops and put it in here.

Filling it up all the way to the top.

just like so

we're gonna take it put it right here.

inside

turn it over.

Turn it back. Got it and do two scoops there.

For the end turn it over. Let it all come out now.

It's important to note that this is what we recommend but you might want to play with adding more color or more powder because if you want it to be vibrant red then put more powder and if you want it to be light blue than just put a little bit but as you begin to do these events, you'll see how much you really want to use.

All right, last but not least. We're gonna go ahead put the lid on it.

Give it a little Shake.

Just like this.

And there you have it. That's how you mix foam daddy UV and colored powder.